One of the most promising next-gen Wi-Fi Routers, the TP-Link AC750 can be used in Router Mode, Access Point Mode, or in Range Extender Mode. Featuring both 2.4 GHz 300Mbps and 5 GHz 433Mbps connections for a total of 733 Mbps total bandwidth, the TP Link AC750 WiFi Extender has significantly gained popularity in the past few years. However, to ensure a smooth functioning of this device, you must ensure the correct TP Link AC750 setup, failing which your investment on this device could be at stake. Don’t panic! Here, we will guide you with the series of steps to set up the device and will answer some of the most commonly asked questions on setting up the same. Read on!
Go Through the TP-Link AC750 Manual First
Like every other wireless router, your newly purchased TP Link AC750 WiFi Range Extender comes with a user manual. The TP Link AC750 WiFi Range Extender manual includes many useful information about the device. These include the device specification, setup procedure, information on the device firmware, TP Link Extender IP address, and many more. It is recommended that you go through this manual properly before setting up the device, especially if you are new to routers.
TP Link AC750 Dual Band WiFi Range Extender Setup
You can either visit “http://tplinkrepeater.net” or use the WPS button of the device to set it up. Let’s have a look at both the processes and complete the setup of TP Link AC750 WiFi Range Extender:
TP-Link AC750 WiFi Range Extender Setup via http://tplinkrepeater.net:
- Remove the Range Extender from its package and keep it on a flat surface.
- Ensure that the device is kept in a close proximity to your router.
- Connect the Extender’s power adapter to an electric socket and turn on the device; ensure that the device’s power LED is lit.
- Connect your computer to the TP-Link AC750 WiFi Range Extender with the SSID, TP-LINK_Extender_2.4GHz/5GHz.
- Launch your preferred web browser on the computer and type “http://tplinkrepeater.net” in the browser’s address bar; press Enter.
- You’ll now be redirected to the device’s login page; enter the username and password in the required fields and click on ‘Login’.
- Follow the on-screen instructions and select your router’s 2.4 GHz/5GHz band network; click on ‘Next’.
If your router doesn’t support the 5GHz band, then click on ‘Skip to Continue’. Further, you can click on ‘Wi-Fi Security’ and enter the password in the required space. Once you enter the password, click on ‘Next’ and follow the steps mentioned under:
- Verify your wireless settings and click on ‘Finish’; hold on until the LED light of the Extender lights up.
- Disconnect the Extender’s power adapter from the electric socket and keep it somewhere between the router and the place where you want to extend the network coverage.
- Wait for the Extender to reconnect and the LED light lit up green.
TP-Link AC750 WiFi Range Extender Setup via WPS
- Connect the TP Link AC750 Wi Fi Range Extender power adapter to an electric socket and ensure that it is kept closer to your router.
- Wait until the power LED and all other status lights lit up.
- Press and hold the WPS button of your router, and at the same time, press the WPS button of your TP-Link Extender AC750 also.
- If you want to connect the Extender to a Dual-Band Router with only 2.4GHz or 5GHz LED on, you must repeat the previous step to connect both the devices.
Upon successful completion of the steps mentioned above, to continue with the TP-Link AC750 setup, disconnect the Extender from the electric socket and place it in between the router and the place where you want to extend the network. It is recommended that you place the Extender in the range of your wireless router, failing which issues like TP-Link Router keeps disconnecting from internet might trigger. After some time, you will notice that the Extender reconnects and the LED light starts blinking green. It might happen that the LED light doesn’t turn blinking green; however, you can bring the Extender closer to the router and ensure the completion of TP Link AC750 WiFi Range Extender setup.
TP Link AC750 Review
Before you opt for purchasing a TP Link Range Extender AC750 Router, it is recommended that you go through the device’s reviews available online. This will not only help you understand the merits and demerits of the device, but will also help you make an informed decision about the purchase.
Additionally, a thorough overview of the router will help you compare both the low-end and high-end features of the device, if available. Lastly, since the device can also be used while you travel, the TP Link AC750 Travel Router reviews can help you better-understand how it works if you want to access the internet while on the go.
Some Commonly Asked Questions About TP Link AC750 Setup
- How do I connect my TP-Link AC750 Router?
You can use a laptop, Wi-Fi-enabled desktop computer, or any other compatible smart devices to connect a TP-Link AC750 Router wirelessly. You must select the ‘TP-LINK_Extender_2.4GHz/5GHz’ SSID for the connection.
- How do I reset my TP-Link Extender AC750?
Resetting a TP-Link Extender AC750 requires you to press and hold the device’s reset button for one second. Doing this will erase all the previous configuration of the device; however, you can use the default login credentials of the Extender to reconfigure it.
- How do I install a wireless AC750 Dual Band Router?
To install a wireless AC750 Dual Band Router, you need to first connect the device to a computer. Once connected, you need to login to the device’s admin console and follow the on-screen prompts to configure the router.
- How do I enable 5GHz WiFi on my TP-Link Router?
Enabling 5GHz WiFi on a TP-Link Router requires you to first login to the router’s admin console. Next, click on ‘Advanced’ followed by ‘Wireless’ and ‘Wireless Settings’. Further, using Band 4, click on ‘5GHz’ and change the Channel and Channel Width. Lastly, click on ‘Save’ to save the changes you’ve made.
Conclusion
The TP Link AC750 Wireless Router can also be used as an Extender as well as an Access Point. With this device at your disposal, you can complete the TP Link AC750 Router setup by following the couple of methods and the series of steps mentioned in this post. Follow them the exact way to ensure a significant and extended wireless coverage of the internet.
