The wireless dual band Gigabit Netgear WNDR4500 N900 Router supports 450 Mbps standard on both the 2.4GHz and the 5GHz bands. Offering a great range of speed and reliable internet connection, the Netgear N900 WNDR4500 lets you experience a hassle-free streaming and gaming service.

Once the Netgear WNDR4500 setup is completed, you can connect it to a printer and wirelessly meet your printing requirements. The Netgear WNDR4500 Router setup opens a wide range of wireless communication features of the router that allows you to further change the settings of the router using the router management console. Carefully read this web page to understand how the Netgear WNDR4500 is done, and learn some effective troubleshooting methods to resolve some of the commonly occurring WNDR4500 router issues.

Netgear WNDR4500 Manual Guide

The Netgear WNDR4500 router package consists of the Netgear N900 WNDR4500 manual. The Netgear N900 WNDR4500 manual includes the complete information regarding Netgear WNDR4500 router installation, setup, and guidelines for using the various features of the WNDR4500 Netgear Router. Refer to the Netgear WNDR4500 manual in case you encounter any challenges during the setup or installation of the router.

Netgear N900 WNDR4500 Setup

How to do Netgear Router WNDR4500 Router Setup?

The Netgear N900 WNDR4500 router setup has been divided into two phases. Here’s a look at them:

Phase 1: Configuring the Netgear WNDR4500 Router

Before starting with the Netgear WNDR4500 router setup, the router needs to be physically connected.

  1. Disconnect any cables connected to the computer and switch on the modem first.
  2. Connect one end of an Ethernet cable to the modem and the other end into the internet port of the router.
  3. Connect the router to the computer by plugging one end of an Ethernet cable to the computer’s LAN port and the other to any of the Ethernet ports of the router.
  4. Switch on the router and ensure that the power lamp is on.

Phase 2: Logging in to the Netgear WNDR4500 Router

  • Perform a Netgear WNDR4500 login by starting with the following:
  • Connect your WNDR4500 Router to the computer and open a web browser.
  • Enter routerlogin.com or 192.168.1.1 on the browser’s address bar and hit enter.
  • Enter the default router login username and password. You will find these details at the back or bottom of the router.

Netgear WNDR4500 Setup Issues

  • Cannot access the router management console using www.routerlogin.com
  • Unable to open the Netgear router login page
  • Netgear WNDR4500 login issues
  • Not connecting to the internet after Netgear N900 WNDR4500 setup
  • WiFi error with WNDR4500 Netgear N900
  • Can’t upgrade Netgear WNDR4500 firmware
  • Netgear WNDR4500 default password not working
  • Netgear WNDR4500 N900VPN issues
  • NetgearWNDR4500 default login username not working
  • Unable to perform the NetgearWNDR4500 reset
  • Netgear Router WNDR4500 error 404
  • Router error 651
  • Netgear WNDR4500 setup flashing ligths
  • Conflicting IP addresses
  • VPN issues during the NetgearWNDR4500 N900
  • Netgear N900 WNDR4500 Password recovery issues
  • Lost or forgotten Netgear WNDR4500 default password

Netgear WNDR4500 VOIP Setup

How to perform Netgear WNDR4500 VOIP setup?

Follow the below mentioned steps to do a netgear WNDR4500 VOIP setup:

  1. Log in to your Netgear WNDR4500 Router using appropriate login credentials.
  2. Click on Security > Services.
  3. Click on Add after configuring the settings for each port.
  4. Click on Security > Firewall > LAN WAN Rules.
  5. Click on Add under the Outbound Services to create rules for Outbound Services.
  6. Go to Security > Firewall > Advanced.
  7. Disable SIP-ALG.
  8. Click on Apply.
  9. Click Security > Bandwidth Profile and add the VOIP bandwidth profile.

Netgear N900 WNDR4500 Login Setup | Troubleshooting WNDR4500

Ensure that all the cables such as the power cable and the Ethernet cable are properly connected. Maintain a visible distance between the router and the modem to avoid the WiFi signals from clashing.

  • If any devices are not in use; however, they are connected to the WiFi network, turn them off.
  • If you are encountering Netgear WNDR4500 setup flashing ligths, restart the router and check if the issue has been resolved or not.
  • If www.routerlogin.com is not working, check your web browser. If the issue persists, try browsing 192.168.1.1 to access the router management console.
  • Ensure that you use the updated web browser.
  • Delete browser cache and cookies, and disable any proxy servers in use.
  • Restart the whole wireless network as well as the modem.
  • If you are unable to log in using the Netgear WNDR4500 default login password and the username, refer to the Netgear WNDR4500 manual for these details.
  • If you have lost or forgotten the Netgear WNDR4500 default password, hard reset your router.
  • Disable the firewall or any proxy servers in use to resolve VPN issues during the Netgear N900 WNDR4500 setup.
  • Check the DNS servers and hard refresh the web page to resolve the Netgear WNDR4500 error 404.
  • If you have encountered error 651, reinstall the network adapter driver and update the Netgear WNDR4500 firmware.
Netgear WNDR4500 Firmware Update:

Performing a Netgear WNDR4500 firmware update helps you in resolving various issues of your Netgear router. Additionally, upgrading the Netgear WNDR4500 firmware adds new and advanced functionalities to the router. Let’s see how you can do the Netgear WNDR4500 firmware upgrade:

  1. Open a web browser on your computer and visit Netgear’s official site.
  2. Download the latest firmware version of Netgear WNDR4500.
  3. Using an Ethernet cable, connect the computer and the router.
  4. Type in www.routerlogin.net and hit Enter.
  5. Enter your router login credentials and press Enter.
  6. Under the Administrator tab, click on Advanced.
  7. Click on the “Firmware Update” option.
  8. Choose Upload, and select the downloaded file.
Frequently Asked Questions (FAQs) on Netgear WNDR4500 N900 Router

How to set up the Netgear N900 WNDR4500 Router?

Here’s how you can set up the WNDR4500 Netgear Router:

  1. Disconnect any cables connected to the computer and switch on the modem first.
  2. Connect one end of an Ethernet cable to the modem and the other end into the internet port of the router.
  3. Connect the router to the computer by plugging one end of an Ethernet cable to the computer’s LAN port and the other to any of the Ethernet ports of the router.
  4. Switch on the router and ensure that the power lamp is on.
  5. Connect your WNDR4500 Router to the computer and open a web browser.
  6. Enter routerlogin.com or 192.168.1.1 on the browser’s address bar and hit enter.
  7. Enter the default router login username and password. You will find these details at the back or bottom of the router.

Why should my WNDR4500 Router be equipped with the latest Netgear WNDR4500 Firmware Update?

Equipping with the latest Netgear WNDR4500 firmware update increases the stability and enhances the performance of the router. Besides, the latest router firmware resolves issues as well as adds new and advanced features to the device.

How can I restore the Netgear WNDR4500 Router to default settings?

Follow the below-mentioned steps to restore your Netgear WNDR4500 Router to its default settings:

  1. Press and hold the reset button on the router’s rear panel until the Power lamp flashes.
  2. Wait until the router reboots.
  3. Enter the default login username and password to access the router management console. You will find this information at the back or bottom of the router.

How to find a lost or forgotten wireless network password for my Netgear WNDR4500 router?

Follow the below-mentioned steps to see your wireless network password and connect to WiFi:

  1. Login to the router management console using the router login credentials.
  2. Under the Setup, click on Wireless Settings to view the wireless network password.

How to do a Netgear N900 WNDR4500 Router firmware update?

If you need to update the Netgear N900 WNDR4500 router firmware update, follow the steps mentioned below:

  1. Open a web browser on your computer and visit Netgear’s official site.
  2. Download the latest firmware version of Netgear WNDR4500.
  3. Using an Ethernet cable, connect the computer and the router.
  4. Type in www.routerlogin.net and hit Enter.
  5. Enter your router login credentials and press Enter.
  6. Under the Administrator tab, click on Advanced.
  7. Click on the “Firmware Update” option.
  8. Choose Upload, and select the downloaded file.

Why does my Netgear WNDR4500 setup flashing lights?

There could be multiple reasons why your Netgear WNDR4500 setup flashing lights. However, you can resolve the issue by simply restarting the router. If the problem persists, do a router reset by pressing and holding the reset port present at the back or bottom of the router.

How to setup VPN on Netgear WNDR4500?

To set up VPN on Netgear WNDR4500 Router, follow the steps mentioned below:

  1. Download the required VPN firmware.
  2. Switch on your Netgear WNDR4500 Router.
  3. Install the firmware. If the process requires you to log in to the router, enter the router login credentials.
  4. On the admin panel, click on the Advanced tab.
  5. On the side bar, click on Administration, and then on Router Update.
  6. Click on browse to look for the required VPN firmware.
  7. Click on Upload.
  8. Connect to the internet using the appropriate SSID and network key.
  9. Set up your VPN on the router.

How to setup Netgear WNDR4500 after reset?

Once you reset the Netgear WNDR4500 Router, you can set up the router by following the steps mentioned below:

  1. Connect the router to the computer using an Ethernet cable.
  2. Launch a web browser on the computer.
  3. Type in routerlogin.net and hit Enter.
  4. Enter the default router login credentials on the requested field and hit Enter.