Covering the wireless range of your network was never possible until devices like TP Link Extenders were introduced. Now, even if your existing wireless router or access point has a limited periphery to cover, you can use a TP Link Extender to extend the wireless reach in a hassle-free way. However, to ensure the smooth functioning of this device, you must be aware of your TP Link Router IP or the TP Link Extender IP address which gives you an opportunity to browse the login panel of the device and eventually access the admin console.
Here, we will discuss what a TP Link Extender IP address is, how you can use it, and help you gather some valuable insights into using the device without any trouble.
TP Link Extender User Manual
Like every electronic or electric device, your newly purchased TP Link Extender or Router comes with a user manual. It is recommended that you go through this manual at least once before you start using the device. This manual is especially useful if you are new to extenders, routers, or access points. In this manual, you’ll find detailed information about the TP link IP address, the device specification, information on the setup procedure, steps on TP-Link Router password change, and many more. Once you complete reading this manual, you can start with the setup of the device and ensure a whole-new world of wireless internet.
Where Can You Find TP-Link Extender IP Address?
Apart from the user manual, you can find the TP Link Default IP address at the back or bottom of your extender or the router. In addition, you’ll be able to see the default username and the password to log into the admin console of the device. The TP-Link IP address for both your extender and the router is 192.168.1.1. In few of the models, the IP address of this device is either 192.168.1.254 or 192.168.0.254.
To avoid any confusion with the device’s IP address, it is better that you refer to the user manual or flip your router or extender to locate the actual IP address.
How to Use TP Link Router IP Default Password?
Now that you are aware of where to find the TP-Link Router login IP, read on to explore how you can use this IP address. To start with, you need to connect the extender to your computer or any other compatible device such as smartphone, tablet, iPad, etc. You can use either the wireless or wired mode of connection to establish a connection between your extender or router and the device you are using for accessing the admin console.
For wireless mode of connection, enable the wireless feature of the device you are using and search for the relevant wireless network name in the list of wireless networks in range. Once you locate the wireless network name of the router or your extender, connect to it by providing the wireless network key. On the other hand, if you prefer connecting the router using an Ethernet cable, connect one end of the cable to one of the LAN ports of the router and another to the LAN port of your laptop or desktop computer. Once the devices establish a connection, you can follow the below-mentioned steps to use the TP-Link default IP address:
- Open a web browser on your computer or the device you’re using to access the admin console of the router.
- Type IP address TP Link, i.e., 192.168.1.1 in the browser’s address bar and press Enter to open the router login page.
- On the router login page, enter the username and the password as mentioned in the user manual or at the back or bottom of the router/extender.
- Click on ‘Login’ to log into the admin console of your router or extender.
- Once you are logged in, you can click on the various tabs and configure the device according to your unique networking requirements.
Why My TP-Link IP Address not Working and How to Resolve It?
If you ever see that the IP address for TP Link Router is not working, try using another IP address and check if you can perform TP-Link Router access. It might be possible that the IP address you are using is not assigned for the router model you are using. So, if you are using IP address TP Link Wireless Router 192.168.1.1, try using 192.168.1.254 or 192.168.0.254 and check if the router login page opens.
In case none of the IP addresses work, you can reset the router and use the default TP-Link Modem IP address to check if the admin console is accessible. Performing the reset of your TP Link Router requires you to follow the series of steps mentioned under:
- Locate the router’s reset button. It is usually situated at the rear end of the device.
- Connect the router’s power adapter to an electric socket and switch on the router.
- Press and hold the reset button using a pointed object like a paperclip. Continue pressing the reset button for about 10 seconds, and release it.
- Once the reset is complete, use the default IP address, the username, and the router to log into the router management console and make necessary changes to the router settings.
Similar to an IP address of TP Link Extender or a Router, if you need to know about TP Link Access Point IP Address, refer to the user manual or flip the device to locate the details. In case you want to change TP-Link Router IP address, you can do so by logging into the admin console of the router and following the on-screen prompts. In some instances, you might see that the TP Link Router keeps disconnecting; however, you can resolve such issues either by a quick restart of the device or by performing a router reset.
