Wireless Dual Band Router

The Netgear WNDR3400 N600 Wireless Dual Band Router ensures a strong and steady flow of signal throughout your home. It offers high-performance wireless internet access required for various applications, like streaming multiplayer gaming, streaming multimedia, etc. With ReadySHARE USB storage, you can convert your USB hard drive to a network storage drive for backup.

Go through the Netgear WNDR3400 review for gathering more information on the router so that you can make an informed decision while purchasing one. The Netgear WNDR3400 Wireless Repeater setup allows you to connect it with a printer and wirelessly fulfill your printing requirements.

Netgear WNDR3400 Setup Manual

With the package of Netgear WNDR3400 Router, you get the Netgear N600 WNDR3400 setup manual. The Netgear WNDR3400 setup manual includes complete information on the router installation, Netgear WNDR3400 access point setup, Netgear WNDR3400 setup drivers download, Netgear WNDR3400 firmware update, default password netgear WNDR3400, and much more. It is recommended that you refer to the Netgear WNDR3400 setup manual before starting with the Netgear WNDR3400 setup or if you encounter any challenges during the installation of the router.

Netgear Router WNDR3400 Setup

For easy understanding, we have categorized the Netgear N600 WNDR3400 setup in two phases. Let’s have a look at them:

Phase 1: Netgear WNDR3400 Router Configuration

  1. Before starting with the Netgear WNDR3400 Wireless Repeater setup, connect the router physically.
  2. Disconnect any cables connected to the computer.
  3. Switch on the modem by plugging its power adapter to an electrical socket ensure that the power light is on.
  4. Connect the router and the modem by plugging one end of an Ethernet cable to the modem and the other end into the internet port of the router.
  5. Connect the router and your computer by plugging one end of an Ethernet cable into the LAN port of the computer and another to any one of the Ethernet ports on the router.
  6. Turn on the router by plugging the power adapter to an electrical socket; ensure that the power light on the router is on.

Phase 2: WNDR3400 Router Login

  1. Connect your computer to the router using an Ethernet cable.
  2. Open a web browser on the computer.
  3. Type www.routerlogin.com into the browser’s address bar and press Enter.
  4. Enter the default username and default password Netgear WNDR3400. You will find these details on the back or bottom of the router. ALternatively, you can refer to the Netgear N600 WNDR3400 setup manual for the default router login credentials.

Some Common Netgear WNDR3400 Access Point Setup Issues

  • Cannot access the router management console using www.routerlogin.com
  • Unable to open the Netgear router login page
  • Not connecting to the internet after Netgear Router WNDR3400 setup
  • WiFi error with WNDR3400 Netgear N600
  • Can’t upgrade Netgear WNDR3400 firmware
  • Netgear WNDR3400 default password not working
  • Default password Netgear WNDR3400 username not working
  • Unable to perform the NetgearWNDR3400 reset
  • NetgearWNDR3400error 404
  • Netgear N600 WNDR3400 setup wizard download issues
  • Router error 651
  • Can’t perform Netgear N600 WNDR3400 setup
  • IP address conflict
  • VPN issues during the Netgear Router WNDR3400 setup
  • WNDR3400 Password recovery issues

Netgear WNDR3400 Access Point Setup | Troubleshooting WNDR3400 Netgear Router

  • If you cannot log in using the default password Netgear WNDR3400 and the username, refer to the Netgear WNDR3400 setup manual for these details.
  • If you have lost or forgotten the default password of the Netgear WNDR3400 Router,hard reset your router.
  • Ensure that all the cables such as the power cable and the Ethernet cable are properly connected. Maintain a visible distance between the router and the modem to avoid the WiFi signals from clashing.
  • Ensure that you use the updated web browser.
  • Delete browser cache and cookies, and disable any proxy servers in use.
  • Restart the whole wireless network as well as the modem.
  • If any devices are not in use; however, they are connected to the WiFi network, turn them off.
  • Disable the firewall or any proxy servers in use to resolve VPN issues during the Netgear N600 WNDR3400 setup.
  • Check the DNS servers and hard refresh the web page to resolve the Netgear WNDR3400 error 404.
  • If you have encountered error 651, reinstall the network adapter driver and update the Netgear WNDR3400 firmware.
  • If www.routerlogin.com is not working, check your web browser. If the issue persists, try browsing 192.168.1.1 to access the router management console.
Netgear WNDR3400 Firmware Update

Performing a Netgear WNDR3400 Firmware update resolves various issues of your Netgear Router. In addition, when you upgrade the Netgear WNDR3400 firmware, more new and advanced features get added to the router. Below-mentioned are the series of steps to perform the Netgear WNDR3400 Firmware update:

  1. Open a web browser on your computer and visit Netgear’s official site.
  2. Download the latest firmware version of Netgear WNDR3400.
  3. Using an Ethernet cable, connect the computer and the router.
  4. Type in www.routerlogin.net and hit Enter.
  5. Enter your router login credentials and press Enter.
  6. Under the Administrator tab, click on Advanced.
  7. Click on the “Firmware Update” option.
  8. Choose Upload and select the downloaded file.
Frequently Asked Questions (FAQs) on Netgear WNDR3400 Router

How can I reset the WNDR3400 Netgear Router to factory default settings?

                Here are the steps to reset your WNDR3400 Netgear Router:

  1. Press and hold the reset button on the router until the Power LED flashes.
  2. Release the button when the power LED starts flashing.
  3. Wait until the router reboots.

 How to set up my NetgearWNDR3400 Router?

Follow the below-mentioned steps to set up your WNDR3400 Netgear Router:

  1. Disconnect any cables connected to the computer.
  2. Switch on the modem by plugging its power adapter to an electrical socket; ensure that the power light is on.
  3. Connect the router and the modem by plugging one end of an Ethernet cable to the modem and the other end into the internet port of the router.
  4. Connect the router and your computer by plugging one end of an Ethernet cable into the LAN port of the computer and another to any one of the Ethernet ports on the router.
  5. Turn on the router by plugging the power adapter to an electrical socket; ensure that the power light on the router is on.
  6. Connect your computer to the router using an Ethernet cable.
  7. Open a web browser on the computer.
  8. Type www.routerlogin.com into the browser’s address bar and press Enter.
  9. Enter the default username and default password Netgear WNDR3400. You will find these details on the back or bottom of the router. ALternatively, you can refer to the Netgear N600 WNDR3400 setup manual for the default router login credentials.

Where can I find the current wireless network password of my WNDR3400 Router?

To find out the current password of your wireless network, you need to login to the router management console first. Next, go to Setup > Wireless Settings page to view the current wireless network password.

Does my Netgear WNDR3400 Router support QoS (Quality of Service)?

Yes, the Netgear WNDR3400 Router supports QoS. It prioritizes the traffic based on different applications like Video, Gaming, and VoIP.

How can I get the latest firmware for my WNDR3400 Router?

When you install the WNDR3400 Router via Netgear N600 WNDR3400 setup wizard download, the router finds the latest firmware on the web and installs it automatically.