TP-Link Technologies Co. ltd is a world-renowned manufacturer of a large number of Computer-networking products. The products include a variety of modems, Wireless Routers, Range extenders, Mobile phones, Powerline Adapters, etc. if you are a TPlink product user, you will probably find the information shared below highly useful. Here we’ll discuss the TP-link router setup methods and learn how to reset the TP-link router. You’ll get knowledge of the TP-link WiFi password change on a few TP-link models as well. So, let’s get started.

How to login TP-Link to the router?

To configure your router, you need to be logged in. Follow the step-by-step instructions and know-how to login to router and access the TP-Link Interface.

  • Connect to the TP-Link network using a wireless or wired medium.
  • However, if you don’t know the password, it’s best to use an ethernet cable and not require a password.
  • Connect to the TP-Link Router with a Browser- open a browser and input your TP Login IP in the address bar. The standard addresses are 192.168.0.1 and 192.168.0.254.
  • You can input the above addresses and try to gain access.
  • Tip- If these addresses don’t work for you, you can visit the TP-Link Login website, and you can use an online tool to find the router IP.
  • After opening the Correct TP-Link server, the TP-Link Login Username and password fields will be visible.
  • Input the current TP-Link Login Username and passwords, if you have changed it.
  • Else, you can use the default log-on details.
  • Now you can log in to your TP-Link router.

Reset TP-link router

If you want to reset the TP-Link router, you need to remember that by performing a hard reset, the TPLink Router will be restored to Factory Default Settings. So, you should load the last configuration file or opt for configuration from the beginning.

Find the WPS/ RESET button on the rear of the device or located on the front panel.

  • Press the WPS button for 5 seconds.
  • The WPD /LED Light will start flashing.
  • Press the button for 10 seconds to reset the router.

Perform the Hard Reset

  • Turn on the Router
  • Press and hold the WPS/ Reset Button for more than 10 seconds until you notice that the SYS LED becomes quick flash from slow flash.
  • Release the button, and now the router will reboot itself to the Factory Default settings.

Router’s Web Interface-.

  • Go to Advanced
  • Click on System Tools.
  • Click on Backup and store.
  • Click on the Factory Default store.
  • Click on Factory Restore.
  • The router will reboot to the Default Factory Settings.

 You can find the Default address Domain name at the bottom label of the device.

The default login and Username are admin( You need to enter all the letters in lowercase)

TP-Link Setup

With a router, you can easily connect multiple PCs and smartphones to the same network. Read on to know the step-by-step instructions for the same and learn how to reset TP-Link Setup.

  • Connect the Power cable to the in an outlet or a surge protector.
  • Plugin the other end into the router’s power input located at the rear of the device.
  • Your router will be powered on, and you can connect your router to the modem to connect with an Internet connection.
  • Take an Ethernet Cable. Plug its one end into the Internet port located on the rear of the router. You can identify the port quickly as it is blue or grey.
  • Plug the Ethernet cable into the back of the modem. The port is probably in yellow.
  • Log in to your PC connected with the TP-Link router.
  • Open any web browser and type in htTP://TPlinkwifi.net in the address bar.
  • The above address will typically work, but if it doesn’t, then you can check the backside of the router to confirm the Default access address of the router.
  • Other options you can try are htTP://192.168.1.1 or htTP://10.0.0.1).
  • Enter the Username and Password if prompted to do so.
  • The information can be found on the same label where the router’s address is written. Most likely, both the Username and password will be admin.
  • Choose a unique and robust password.
  • Log in to the user interface. Click on Wireless 2.4.
  • Click on Wireless Settings.
  • Confirm the Network Name or change the name.’
  • The Network Name will be visible to the users when they’ll search for the wireless networks and want to connect. (if you are unable to change the Network Name, you can follow the next step as in some models, the following action might be required to change the Network Name.
  • Click on Advanced, Wireless, and then click on Wireless Settings to change the Network Name.
  • Click on Wireless Security.
  • Enter your new password.
  • Click On the Save button.
  • In the Version box, select WPA2-PSK.
  • There are specific models on which you might need to select Security. Then click on Version, Click on WPA/WPA2 – Personal and WPA2-PSK Wireless Settings.
  • Type your password in the Wireless Password Field.
  • Click on Save.
  • Now you have been successful in TP-Link Setup, and now you can effortlessly connect devices to your network.
  • Important Points to remember:
  • Whenever you want to change your wireless security settings, you have to reconnect your wireless device.
  • If you have a guest network, you need to repeat the above steps individually for each interface as each system is controlled separately.
  • If your router is dual-band, then also you need to follow the instructions for each network, and you should use different Network Names for each system to avoid confusion.

TPLink WiFi password change

for Wireless N Nano router: ( TL-WR702N & TL-WR802N

  • Log in to the web-based utility (Management Page of TP-Link wireless router.
  • Go To Wireless and Click On Wireless Security.
  • Select WPA-PSK/WPA2-PSK, .
  • Enter your default TPLink Password in the PSK Password box.
  • If you have changed the password, click on Save. Now reboot the router.

For Wireless AC Router( Steps for 11AC Wireless Router & AP Such as the C3200 Model) 

Log in the router and go to Basic.

Click on the Wireless page.

Enter your Wireless Network Name and Password.

Click on Save.

If you have changed the password, reboot the router & AP.

For Wireless G AP –(If you want to connect Wireless G AP such as TL-WA501G, then you can follow the step-by-step instructions mentioned below to find or change the Wi-Fi password)

  • Log in to the AP.
  • Go to the Wireless option and click on Security Settings to verify your security page.
  • For WEP, the password is Key 1.
  • For WPA-PSK/WPA2-PSK, the default TP-Link password is PSK Password.
  • If you have changed the password, click on the Save button.
    If you have changed the password, you need to reboot the router.

Wireless ADSL Modem Router( TD-W8901G/TD-W8951ND/TD-W8961ND models)

  • Login to the Modem.
  • Go to Interface setup
  • Click on Wireless
  • On the Wireless page, you’ll find the Pre-Shared Key or Key 1.
  • If you have changed the password, reboot the modem.
  • Go to Advanced Setup and then on the SysRestart page. If you have changed the password
  • Restart the modem with the current settings.

For Broadcom- TD- W8960N

  • Login to the Modem.
  • Go to the Wireless and then the Security Page to locate the Wireless Key.
  • It can be the WPA Pre-shared Key or the Network Key 1.
  • Go to Management and click on the Reboot page option.
  • If you have changed the password, you need to reboot the modem.

TP-link WiFi extender setup 

Learn how to set up a TP-Link extender. The process of the TP-Link Wi-Fi Extender setup is straightforward.

  • Switch off the router, modem and your PC before connecting.
  • Take an ethernet cable and then connect the modem to the WAN port of the router.
  • Now connect your PC with the router’s LAN port using the ethernet cable.
  • Switch off your router and PC.
  • After a while, switch on the modem.
  • Log into the web access page of the router.
  • The WAN connection will be configured.
  • Enter the Username and Password.
  • Go to the Status Page and verify the WAN tab to check the connection.
TP-link ac 1750 Manual

the TP-Link Archer C7 AC1750 is a wireless Dual Gigabit Router that integrates a 4-port switch, Nat-Router, Firewall, and Wireless AP. If you want to know about the TP-Link Ac 1750 manual, then you need to know that there are several methods with which you can connect wireless devices to the extender. You can use the WPS or PIN Code to connect them. You can connect different wireless-enabled devices such as Android phones, tablets, and as well as Network Cards.

Below you can find the TP-Link AC 1750 Wi-Fi Range Extender Manual: Follow the step-by-step instructions for TP-link ac 1750 setup. 

  • Plugin the extender to a power outlet, wit for the blue light on the device to become stable, and now the device is on.
  • You need to position the extender between the wireless device and the zero-signal area.
  • Go to the domain and locate the Username and password.
  • Go to Settings.
  • Click on Wireless and then on WPS. Activate It.
  • Using the PIN method for configuring, type the PIN in the field given.
  • Selecting the generate option to get a new Pin, or you can choose the Default Pin by selecting the Default option. It will restore the PIN to its settings.
  • Press the Push Button, and it will connect the extender to the network.
  • Tap on the Connect option if you are using the PIN method.

Tune into this space for more useful information on TP-Link products and Troubleshoot Solutions.

Related Queries :
How to Setup TP link ac1750 router
TP-Link router extender reset