Throughout this blog, we will refer to the Verizon router yellow light. It has a circular status LED light at the front, which generally will be white. Everything is working well when our Verizon Fios Home Router G3100 shows a green light. However, seeing a yellow light means the internet connection is down. But there are several reasons for this, and we will explain each in this blog, as well as what you can do in each case.
What does Yellow Light mean on Verizon Router?
If your Verizon Fios router has a blinking yellow light, it has no internet connection. A solid Verizon Fios router yellow light means that the extender is in pairing mode. The blinking lights vary according to the distance from the extender to the router so that you can find the best position for the extender.
To fix this, you need to perform a soft reboot by pressing and holding the reset button located on the back of your router for around 3 seconds. Your router will blink white when it gets reconnected. If the soft reboot doesn’t do the trick, you should take more advanced troubleshooting steps, which are mentioned below in this blog.
Why Is My Verizon Router Light Yellow?
Depending on the specific cause of the solid yellow light on Verizon router, you may have to experiment with several solutions to fix the yellow light.
- A bad connection or unplugged cable/wire
- Overheating
- Outdated firmware or software
- Unpaid bill
- Verizon outage
- You might also see the blinking yellow light only if you have an extender.
If you are using an extender to increase the coverage of your internet at home, you can tell how strong the connection is by the frequency the yellow light is blinking. When the light flashes faster, the router will be able to communicate with the extender better. However, if you want to access your Verizon Fios account, you need to go to the Verizon Fios loginpage. Now, let’s move ahead to the solutions to solve Verizon’s yellow light.
How To Fix Verizon Router Yellow Light?
Since a yellow light indicates: Fios router yellow light no internetissue, there are a few different ways you can go to make that yellow light off and back to solid white light as it should be:
Method 1: Check the Ethernet Cable
In order to broadcast WIFI through your home, your ethernet cable must be connected to your local internet services and can be damaged by small animals like mice or wear and tear over time. If you seeVerizon home router yellow light, then you need to check your ethernet cable:
- Look at the back of your router for the two ethernet cables. There should be two cables there.
- After locating the cables, make sure they are not loose and are connected correctly. If they are, re-attach them gently, then use your router again to check if it has regained connectivity.
- It’s possible that your router’s cables have become damaged. Cables wear out with time, so if you have had them for a few years, it may be time to replace them. Animals can also damage the cords if they get ahold of them.
- If you need help replacing cables or tightening cable connections, you can always hire a technician.
Method 2: Rebooting Your Router
As soon as you are sure that the problem is not caused by a loose or damaged cable, you should reboot your router to restore the connection.
- You should turn off your router before moving on. Some routers have a backup battery, so ensure you remove it and then wait for 30 seconds.
- Then turn on your router back, reconnect your backup battery if you have one, and wait for it to boot up.
- Now, you will see the Verizon router blinking white light, indicating that there is a connection and everything is working correctly. Your internet should be working again after rebooting your router most of the time.
Method 3: Unplug the Ethernet Cable
This method is similar to rebooting. Follow the below steps to do so:
- First, unplug your Ethernet cable.
- Then, unplug the router.
- Now, wait for some seconds, plug back the router, and wait for the green light to come back on.
- Then, plug back your Ethernet cable and check if the Verizon Fios router yellowlight has turned to white or not. If not, move to the next method.
Method 4: Router Overheating
You may experience connection issues if your router is overheating. Most modern routers are designed to prevent overheating, but there are some expectations. Sometimes, you may also notice a Verizon router yellow light after power outage, or the router feels hot, then you need to turn it off for a little and let it cool down.
Also, reposition your router if it’s in a location where it might overheat, like next to a heating vent or furniture or drapes that might reflect the heat. Connect any backup batteries before shutting them down.
Method 5: Reset Your Router
It is possible to bring your router back to factory settings when you reset Verizon router, so a reset has a few benefits:
- By cleaning out cache data, other problems can be resolved.
- It prevents any ongoing attacks or hacks on the hardware.
- You can reset your router by pressing and holding the reset button for around 20 seconds. After waiting for some minutes, your router will reboot and reconnect.
Method 6: Blinking Yellow Light for Extender
When your router and extender pair, the Verizon router solid yellow light
blinks, which means there is not enough signal for your extender to receive from the router. The faster the light blinks, the closer your extender is to receiving a signal from your router.
You can easily solve this problem by moving the extender closer to the router until the yellow light turns solid. After the pairing is complete, the light should turn white to indicate a stable connection.
Method 7: Contact Support
If you have tried all the above methods and still do not get the Verizon router yellow light fix, then it’s time to connect with your Service Provider. Occasionally, there may be maintenance going on behind the scenes that could affect your internet connection, and you may have to go without the internet for a while. Typically, your Service Provider will contact you before scheduled maintenance, but if they do not, you can always contact them and inquire. Unfortunately, you cannot speed up the process on your end.
Why is Verizon Fios Router Blinking Blue Light?
If your Verizon Fios router is working, it has four Ethernet slots and the unified button, a lower button on the front panel. When the router is connected to the internet and turned on, that button glows white. But if a blinking blue light Verizon router occurs, you might have pressed the WPS button on Verizon router. It means that your router is in pairing mode. A solid blue light will show when a connection is established, indicating that the pairing was successful.
Some Frequently Asked Queries on Verizon Router Yellow Light
- How do I fix the yellow light on my FIOS router?
Verizon Fios router’s yellow lights show that it is not connected to the internet. The easiest solution to fix this is to reconnect. You need to perform a soft reboot. To do so, you need to press and hold the reset button located on the backside of your router for around 3 seconds. When your router starts to will blinks white, it means it has reconnected.
- How do I fix my Verizon wireless router?
To solve the issues with your wireless router, try to turn your router off and on, which solves many connection problems. For this, you need to unplug your router and then wait for 1 minute. Now, plug your router back in an attempt to connect to the Internet.
- Why is my Verizon Fios internet not working?
If your internet is not working, there may be some network issue. The simple fix is to restart your router. If that does not help, reset your home router, but you will lose all of your current network settings, such as the WIFI network name, password, etc.
- How do you reboot a Verizon router?
To reboot the router, unplug the router, then wait for a second, and then again plug back your router. Now, wait 1-3 minutes for the initialization process to be completed. Now, attempt to connect to the internet.
Wrapping Up
Even after applying the above tricks, if it still does not work, it might be time to repair the router. You should seek technical assistance to help you solve your Verizon yellow light router issue as soon as possible. To be safe, you should cover your Ethernet cables and broadband cables with protective sheathing to ensure that rodents, insects, or other creatures do not damage them. To ensure the safety of the cables, perform routine inspections.
