Among the most popular networking devices, Cisco Linksys Routers are known for their innovative design and impeccable routing capabilities. Whether you have access to the wired or wireless-enabled devices, you can configure the router and use devices like desktop computers, laptops, iPhones, Android devices, tablets, iPads, etc. to access the internet. However, instances might happen when you encounter Linksys router problemsas a result of which you can’t access the internet at all. In such cases, you can follow some simple troubleshooting methods to ensure continued access to the internet.
Here, we will discuss why the various types of problems in Linksys Routers occur and how you can perform some of the most effective, yet simple Cisco Linksys Router troubleshooting. Read on!
Some Common Linksys Router Problems
There could be multiple types of problems in Linksys Routers. Before you start troubleshooting an issue, you must be able to identify the root cause behind a specific problem. It will help you fix the issue both effectively and quickly. Issues likeLinksys Router problems after power outage,Linksys parental controls not working, Linksys Router firmware update failure, etc. are some of the less likely occurrences. Here’s a look at some of the most common issues of Linksys Routers being faced by users:
- Dropping or intermittent wireless connectivity
- Linksys router not working after reset
- Slow downloads
- Linksys router not getting full speed
- Can’ access the router’s web-based setup page
- router blocking website
- Can’t connect to Linksys WiFi
- Linksys Router red light
- Linking Router blinking orange light
Performing a Linksys Router Troubleshooting
Now that you have an understanding of some of the most common problems of Linksys Routers, read on to explore the various ways by which you can resolve the problems. First, if you see that the internet not working; however, your device is connected to the wireless network, ensure that you are connected to the correct and relevant wireless network. Also, ensure that you have used the correct Wi-Fi network key to connect to the wireless network.
Another Linksys troubleshooting to resolve the internet issues is to restart the router. For this, first, turn the router off and disconnect the router’s power adapter from the electric socket. Plug the adapter back to the socket after two minutes and turn on the router to check if the issue is resolved.
Linksys WiFi Not Working? Here’s the Fix!
If you notice that the WiFi connection of your Linksys Router not working, ensure that you have connected your Wi-Fi device to the correct wireless network and that you have used the correct wireless network password. If everything seems fine, restart the router. This should fix Linksys router problems.However, if the issue of WiFi still persists, you can reset the router and check if the issue is resolved. Here’s the series of steps involved in resetting your Linksys Router:
- Turn on the router and ensure that the power LED is lit.
- Locate the reset button of the router. It is usually located at the rear end of the router.
- Press and hold the reset button for 10 seconds, and release it.
- You will notice that the router’s status lights flicker and it restarts.
Once you reset the Linksys Router, all the previously configured settings will get erased. Hence, it is recommended that before you do a reset, note down all the information included in router settings on a notepad. After the reset, you can log into the router admin console and reconfigure the router by referring to the notes.
Linksys Router Troubleshooting Blinking Lights
Your Linksys Router has multiple status lights that indicate the different statuses of the router. Issues likeLinksys Router keep flashing, Linksys Router blinking red or orange are some of the most common issues being faced by the users of Linksys Router. Irrespective of the reasons behind these, you can follow some simple troubleshooting steps to get rid of the issue and ensure continued access to the internet.
Tips to Resolve Linksys Router Red Light Issues
If your Linksys Router starts flashing the red light, it indicates that there is a lack of communication between the router and your modem. Besides, any issues at the ISP’s end can also trigger this issue. Resolving this requires you to follow the below-mentioned troubleshooting steps:
- Ensure that all the cables are properly connected to the router and your modem.
- Check if there is any physical damage to the Ethernet cable connecting the router and your modem. If yes, replace the cable with a new one and check if the Linksys routers troubleshooting is a success.
- If the issue of the red light still persists, turn off the router and disconnect all the cables connected to it, including the power adapter.
- Wait for two minutes and reconnect all the cables back to their respective slots.
- Turn on the router and check if the issue is resolved. If not, reset the router. Press and hold the reset button of the router for 10 seconds and release it.
Since resetting the router will erase all your previously saved settings of the router, it is recommended that you note down all the existing router settings on a notepad. This will help you reconfigure the router easily. After the reset, you can change password on Linksys Router and use it for all your future logins.
Tips to Resolve Linksys Router Orange Light Issues
If you see a stable orange light at the front of your Linksys Router, it indicates that the device is powered on. However, if the orange light starts blinking, it is an indication that the router firmware is malfunctioning. In most cases, a simple reboot of the router works as an effective Linksys troubleshooting. All you need to do is first power off the router and disconnect the power adapter of the device from the electric socket. You can reconnect the adapter after two minutes and check if the issue is resolved.
After rebooting the router, if you see that the orange light is still flashing, you need to update the firmware. Here’s how you can do it:
Download the firmware update:
- Open a web browser on your computer and visit the official site of Linksys.
- Navigate to the downloads section and type the router name and model in the search box.
- Click on the “Download” link next to the recent firmware update available for your router.
- Wait for the download to complete. Save the downloaded file into the local disk of your computer.
Install the Downloaded firmware:
- Connect your computer to the router either wirelessly or using an Ethernet cable.
- Open a web browser on your computer and type the router’s IP address in the browser’s address bar.
- Press Enter to open the router login page.
- Enter the router login credentials in the relevant fields and click on “Login” to log into the router admin console.
- Click on the “Firmware” tab and then on “Browse”.
- Select the downloaded firmware file from your computer and click on OK to proceed.
- Once the firmware update is completed, log out of the router admin console.
Linksys Router problems could be many; however, it is important that you identify the root cause of the problem. In most cases, a mere restart of the router fixes the issue, but sometimes you need to go through other troubleshooting methods. Follow those methods the exact way as mentioned in this article and get rid of some of the most commonly occurring problems of Linksys Routers.
