What is the Linksys WRT54G Default Password and How to Use It?

With a data transfer rate of 54 Megabits per Second and built-in 4-port Switch and Wireless-G Access Point, the Linksys WRT54G Router is increasingly gaining huge popularity. You can use the full-duplex fast Ethernet ports to connect up to four wired Ethernet devices to scale your network. Like other wireless routers, the Linksys WRT54G also comes with a default password. You can use the Linksys WRT54G default password to log into the router and make necessary changes to the router settings. Here, we will discuss what is the default password of the Linksys Wireless G Router WRT54G and how you can use it for performing various tasks.

Linksys WRT54G Default Password

Your newly purchased Linksys WRT54G Router comes along with the WRT54G default password. You can use the password to log into the router management console. The WRT54G default login requires you to use “admin” as the default password along with a username. You can refer to the user manual that comes along with your router. The manual contains detailed information about the router specification, the setup procedure, and information on Linksys WRT54G reset, information on how to change Linksys password, and much more.

Hence, it is recommended that you go through the Linksys WRT54G manual before using the router, especially if you are new to routers. This will also keep you prepared to resolve any issues that may arise in the future.

Performing Linksys WRT54G Setup

Now that you have understood what Linksys WRT54G passwords are all about and how to use it, read on to explore the series of steps involved in setting up the router. For easy understanding, here, we have classified the Linksys WRT54G setup into two stages. The first one is the hardware setup and the other is the Wi-Fi setup. Let’s have a close look at each of them:

Stage 1: Hardware Setup

1. Remove the router from its package and keep it on a flat surface.
2. Connect the modem and your router using an Ethernet cable.
3. If you prefer using wired connection, you can connect one or multiple computers to the Ethernet ports of the router, marked 1 through 4.
4. Now, connect the router’s power adapter into the electric socket and switch on the power button.

Stage 2: Wi-Fi Setup

1. Open a web browser on your computer and visit the router login page by browsing the IP address, 192.168.1.1.
2. On the router login page, leave the username field blank and enter “admin” as the WRT54G default password.
3. Click on “Login” to log into the router management console.
4. Once you are logged into the router admin panel, click on the “Wireless” tab under the Setup window.
5. Name your wireless network (SSID). It is recommended that you don’t use any private information while naming the network as everyone in range can see it.
6. Click on “Save Settings” and then Continue.

After completing the Linksys Router login WRT54G Wi-Fi setup, you must set up the security of your wireless network. To do this, click on the “Wireless Security” tab while logged into the router admin panel. You need to set the security mode to WPA2 Personal and enter a password in the WPA Shared Key section. Finally, click on “Save Settings” to save the changes. Your wireless network is ready for use.

Updating the WRT54G Firmware

Updating the firmware of your Linksys WRT54FG Router is important. It adds new features to the router as well as keeps the router safe from potential online threats. In most of the cases, the firmware gets automatically updated; however, if you need to do the manual update of WRT54G firmware, follow the below-mentioned steps:

1. Connect the router to a computer using an Ethernet cable.
2. Open a web browser on your computer and visit the router manufacturer’s official website.
3. Download the latest version of the firmware for your Linksys Router.
4. Once the firmware is downloaded, save the file to the local dick of your computer.
5. Visit the router login panel by browsing the default IP address of the router. Enter the router login credentials into the required fields and click on “Login”.
6. Navigate to the “Firmware” tab and click on it.
7. Click on the “Browse” option to upload the recent firmware file downloaded.
8. Click on OK to start the firmware update process. Wait until the firmware update is completed.

How to Reset Linksys Router WRT54G Router?

Instances occur when you might have changed the router login password and lost it. In such cases, you cannot log into the router; however, you can set the password to the default one by resetting WRT54G. Once you reset the router, all your previously configured settings erase. So, it is recommended that you note down the router settings on a notebook so that you don’t have to encounter any challenges while reconfiguring the router.

To reset the Linksys WRT54G Router, press and hold the reset button of the router for about 10 seconds. You will notice that the router’s status lights flicker and the router reboots. You can release the reset button and wait for the router to reboot completely. After the reset, you will notice that the router settings are erased. You can now use the default password of the router to log into the router admin console and reconfigure the device. Similarly, if you need to fix any issue while doing the Linksys EA7500 setup, you may need to reset the router and start configuring it.

Final Thoughts

The default password of Linksys WRT54G Router is “admin”. Setting up the router requires you to connect the router to your computer either using an Ethernet cable or wirelessly. For WiFi connection, you need to log into the router management console by browsing the default IP address of the router and then providing the router login credentials. Once you are logged in, you can access the “Wireless” tab to configure the device for giving the wireless internet access to your Wi-Fi-enabled devices.