Reset ATT Router

Having an ATT Router or modem can fulfill all your networking requirements with ease. That said, ensuring the proper setup of this device is very important. Once the device setup is done, you can use any or your compatible wired or wireless-enabled devices to connect to the internet in no time. However, in some cases, you might need to reset ATT Router, especially when you lose or forget the login credentials of the router. Since the router reset completely erases all the previously configured router settings, you must be cautious while performing the rest.

Read on to explore how to reset AT&T fiber router and get answers to some of the most commonly asked questions about this process.

Before Performing ATT Router Reset

Since the router reset erases all your previous settings, it is recommended that you note down the existing router settings on a notepad which you can refer to later while reconfiguring the device. To do this, you need to log in to the router admin console using the ATT Router IP address, the username, and the login password. To start with the process, connect the router to your computer using either an Ethernet cable or wireless medium. Once the router and your computer establish a connection, follow the below-mentioned steps to log into the router admin console and note down the router settings:

  1. Open an internet browser on your computer.
  2. Type 192.168.1.1 in the browser’s address bar and press Enter to open the router login page.
  3. Enter the username and password in the required fields, and click on ‘Login’.
  4. Once you are logged into the router admin console, you can click on the various tabs and note down the settings on your notepad.

Why Do You Need to Reset AT&T Router?

Apart from losing or forgetting the login credentials of your AT&T Router, instances occur when you might see that the device is blinking a red or orange light. Such issues usually happen when the router is unable to communicate with the modem or if there’s any technical glitches at your ISP’s end. In case there are no issues at the ISP’s end, you must check if the Ethernet cable connecting the router and your modem is in proper condition. If there are any physical damages to the Ethernet cable, you must replace it with a new one and check if the issue is resolved.

Alternatively, you can disconnect the router and modem power adapter from the electric socket, wait for about two minutes, and connect them back to turn on the devices. However, if changing the Ethernet cable or restarting the networking devices doesn’t resolve the blinking of the red or orange light, you need to reset the router.

How to Reset ATT Router?

Now that you are aware of the various instances where a router reset is necessary, read on to explore the series of steps involved in the process to reset ATT Router:

  1. Locate the router’s reset button. You can find it at the rear end of the router.
  2. Connect the router’s power adapter in an electric socket and turn it on.
  3. Press and hold the reset button for about 10 seconds using a pointed object, such as a paperclip.
  4. You will notice that the router’s status lights flicker and the router reboots, which means that the factory reset ATT Router is complete.

Common Queries about ATT Router Reset

  • What happens if I reset my AT&T router?

When you perform an AT&T Router reset, all your previously configured settings get erased. It is recommended that you note down the router settings on a notepad before resetting the device.

  • Why is my ATT WiFi not working?

If you see that your ATT WiFi is not working, it might be possible that the WiFi network you’ve selected is incorrect. However, if you’ve selected the correct WiFi network, check if the WiFi key you’ve entered is correct.

  • Where is the reset button on an ATT Router?

You can find the reset button on an ATT Router at the rear end of the device beside the power input. To reset the device, you need to press and hold the reset button for about 10 seconds using a pointed object such as a paperclip.

  • How do I troubleshoot my Wi-Fi?

Troubleshooting your WiFi requires you to check if the router settings are correct. Next, you can restart the router or your modem to resolve any issues with the WiFi connection. In some cases, resetting your router or the modem resolves WiFi-related issues.

In Conclusion

You can reset an ATT Router by pressing and holding the router’s reset button for about 10 seconds. It is better if you can note down the existing router settings on a notepad so that you can refer to them while reconfiguring the router. Once your ATT Router reset is completed, you can use the router’s default ATT Router login credentials to log into the router management console and reconfigure it.

Leave a Comment