Are you facing challenges connecting your Belkin Router? If yes, then sit back and relax. It is common to encounter issues while using your Belkin Router for internet connectivity. Several reasons could lead to the Belkin router not working issues; however, you can follow some simple troubleshooting steps to deal with them and ensure continued internet with your Belkin Router. Read on to explore why the Belkin Wireless Router not working issue occurs and how you can fix it using some simple techniques.
Why Is My Belkin Router Not Working?
Before troubleshooting the Belkin router not working issue, it is important to identify the reason behind it. This will help you in resolving the issue more effectively and quickly. You might need to perform a Belkin router setup. For instance, a Belkin N300 setup often fixes the “router not working” issue for the N300 model. However, to perform a fresh setup, you need to reset the router first. To sum up all, the reasons why you would encounter my Belkin Router is not working issue is due to the following:
- Issues with the Internet Service Provider (ISP)
- Belkin Router IP address not working
- Defect in the Ethernet cable or wireless setting issues
- Loose cable connectivity
- Router firmware issues
How To Resolve If Belkin WiFi Router Not Working?
Whether it is a wired or wireless internet connection, losing an internet connection may hamper your work. However, if you are using a Belkin Router and encounter such issues, you can follow the below-mentioned troubleshooting steps:
- Switch off the main power and unplug all the cables attached to your modem, router, and computer.
- Wait for about two minutes.
- Plug all the cables into the appropriate slots and switch on the main power supply.
- Wait until the power lights are turned on.
- Once the power lights are stable, check if you are able to connect to the internet.
- Your Belkin WiFi Router not working issue should get resolved. Issues like Belkin Router no light and Belkin router wireless light off could also be resolved by following the above-mentioned troubleshooting steps.
Instances may happen when you can access the internet using the wireless connection of your Belkin Router; however, you cannot access the internet using the wired connection. You might wonder why my Belkin Router is not working. In such cases, you can check the physical connection of your Belkin Router. The problem could arise due to defects in the Ethernet cable. However, to start with the proper troubleshooting of your Belkin router not working issue, follow the below-mentioned steps:
- Switch on your Belkin Router and ensure that the power LED is on.
- Check if the physical connection like the power cable, lights, etc. is in proper condition.
- It may happen that the Belkin Router IP address not working. Check if appropriate IP addresses are mentioned.
- In case the cables are not plugged in properly, plug them into the appropriate slots properly.
- Ensure that all the relevant status lights on the Belkin Router are properly lit.
- Check for any physical damages to the Ethernet cable.
- If everything is fine, your Belkin WiFi Router not working issue should get resolved.
Belkin Router Not Working After Reset? Here’s The Fix!
Performing a Belkin Router reset allows you to resolve any issues associated with the device. When you reset Belkin router, you can reconfigure the router, set a new Belkin router login password, make configuration changes, and change wireless or wired connection settings. However, if you have performed a reset of the router and notice that it is not working anymore, switch off the router for about two minutes. Disconnect any cables connected to it and then reconnect them. Switch on the main power supply and check if the status lights of the router such as power LED, wireless, wired, and internet lights are blinking. This way, you can resolve the Belkin Router not working after reset issue.
Frequently Asked Questions (FAQs) on Belkin Router Issues
- Why is my Belkin router not working?
Belkin Wireless Router not working issues could occur due to several reasons, such as ISP-related issues, defect in the Ethernet cable, incorrect wireless settings, and so on. In most cases, a simple restart of the entire network resolves the issue.
- How do I fix my WiFi router not working?
In case your Belkin WiFi Router is not working, follow the below-mentioned troubleshooting steps:
- Ensure that the Belkin ROuter is turned on and that the power LED is stable.
- Ensure that the WiFi status light and the internet light is blinking.
- If the router status is blinking, you should be able to connect to the internet; however, if the problem persists, try restarting the entire network by disconnecting the power cable for about two minutes.
- How can I reset my Belkin router?
Resetting your Belkin Router requires you to insert a pointed object, such as a paperclip into the router reset port. Press and hold the reset port for about 10 seconds and you will notice that the router is restarting automatically.
- How do I fix the orange light on my Belkin router?
The Belkin Router not working orange light can be fixed by power-cycling the modem and the router. Unplug all the cables from your modem and the router for about two minutes. Plug the cables back to the appropriate slots and switch on the devices to check if the issue has been resolved.
- What happens when you reset a Belkin router?
When you reset a Belkin Router, the router starts performing better than before. The reset removes all the settings and configurations of the router that you have previously made. You need to set up the router all again.
- What does an orange light mean on my router?
An orange light on your router indicates that there is some issue with the internet or that your internet speed is slow. A simple restart of the router often resolves this issue.
- How long do routers last for?
The longevity of routers depends on their usage. Most of the routers usually last for 3-4 years; however, you can ensure its longevity by switching it off while not in use. It eliminates the risk of overheating and hence makes the router life longer.
- How to restart Belkin Router?
Restarting the Belkin Router requires you to press and release the power button on the router first. Next, you need to unplug the router power cable from the electrical socket and wait for about two minutes. Lastly, plug the power cable into the electrical socket and press the power button on the router.
Belkin Routers are excellent when it comes to fulfilling your wired and wireless network requirements. However, instances occur when you encounter various issues with the router, such as Belkin router not working. Follow the various troubleshooting techniques listed here and ensure a quick recovery of your internet services.
