One of the top-selling networking devices, D-Link Wi-Fi Dual Band Range Extender DAP-1520, is known for significantly enhancing the wireless signal of your router. It means, whenever you notice that there is a lack of signal strength of your existing wireless router, you can perform the D-Link DAP-1520 setup to connect a host of wireless-enabled devices such as laptop, Wi-Fi-enabled desktop, or smart devices to connect to the router and surf the internet wirelessly. Read on to explore how this works and ensure a seamless journey into the world of the internet.
D Link DAP 1520 Manual
Your newly purchased D-Link Wi-Fi AC750 Dual Band Range Extender (DAP-1520) comes with the D Link DAP 1520 manual. You can refer to it and find detailed information on the extender’s specification, installation procedure, D-Link DAP-1520 setup procedure, and many more. Before you start with the setup or installation of the device, go through the D Link DAP 1520 manual carefully and ensure that you have noted certain information like the wireless network name (SSID), the security key, and the default IP address of the router. After referring to this manual, you can also search for the D-Link DAP-1520 review online and make an informed decision if you haven’t purchased the device yet.
Requirements For D Link DAP 1520 Setup
Before we start with the D-Link DAP-1520 setup, you must ensure the availability of the following requirements:
- A wireless router with the readily setup wireless network
- Ensure that the router has a WPS button so that you can set up the extender easily
- A computer or smartphone to set up the Extender
- For the app setup process, you will require a mobile phone
- Wi-Fi credentials such as the SSID and the wireless network passphrase
D Link DAP 1520 Setup
Now that you are aware of the requirements for performing the D Link DAP 1520 setup, read on to explore the series of steps involved in it. To start with, plug the power adapter of the device into an electrical socket and turn on the device. Once the device is turned on, follow the below-mentioned set of instructions to complete the setup of D-Link DAP-1520 Range Extender:
- Open the wireless utility on your computer or any Wi-Fi-enabled device.
- Select the SSID (the Wi-Fi network name) and enter the password.
- Open a web browser on your device.
- Type http://dlinkap.local./ into the browser’s address bar and press Enter. You can also enter the IP address of the device into the browser’s address bar and press Enter.
- The next page will prompt you to enter the device’s username and password. You will get these details in the device’s user manual.
- Click on Login.
Once you are able to connect the DAP-1520 with the existing router, it will be assigned with a new IP address. The assigned IP address is based on your wireless router or network DHCP settings. You can perform a D-Link Router login and see the DHCP table. On the home page, you can see the current status of your wireless network.
How To Update The DAP-1520 Firmware?
While using the DAP-1520 Range Extender serves an excellent way to enhance the range of your wireless network, updating the firmware is critical towards smooth functioning of the device. The firmware not only eliminates the risk of encountering any intermittent glitches, it also adds some multiple features to the device. Here’s the series of steps involved in updating the DAP-1520 firmware:
- Open a web browser on your computer and visit http://dlinkap.local.
- Enter the Admin password in the required field. In case you changed this password, enter the one you created, else leave it blank and click on Login.
- At the top, click on Management and then on Upgrade from the drop-down menu.
You can upgrade the firmware manually by selecting the firmware file that needs to be downloaded earlier. Once you upload the file, the device will automatically complete the firmware upgrade process.
D Link DAP 1520 Reset
Instances occur when you might encounter issues using the D-Link DAP-1520 range Extender. These include sudden malfunction of the device, intermittent network disconnection, and when you need to restore the settings of the device to factory default settings. To resolve such issues, you need to perform D Link DAP 1520 reset by following the steps mentioned below:
- Locate the reset button of the D-Link DAP-1520 Range Extender.
- Grab a pointed object like a paperclip, insert and press and hold the reset button for about six seconds.
- You will notice that the range extender restarts and the device configuration is set to the factory default settings.
The reset also sometimes helps in resolving the D’Link DAP 1520 flashing orange issue. After the reset, you will notice that the device is functioning normally.
Common Queries about on D Link DAP 1520 Setup
- How do I setup my D Link DAP 1520?
Setting up the D-Link DAP-1520 requires you to follow the below-mentioned steps:
- Open the wireless utility on your computer or any Wi-Fi-enabled device.
- Select the SSID (the Wi-Fi network name) and enter the password.
- Open a web browser on your device.
- Type http://dlinkap.local./ into the browser’s address bar and press Enter. You can also enter the IP address of the device into the browser’s address bar and press Enter.
- The next page will prompt you to enter the device’s username and password. You will get these details in the device’s user manual.
- Click on Login and access the various tabs to complete the device’s configuration.
- How do I reset my D Link DAP 1520?
To reset the DF-Link DAP 1520 Range Extender, press and hold the reset button for about 6 seconds. You will notice that the status lights flicker and the device will restart.
- How do I setup my D Link Wi-Fi Extender?
To set up the D-Link Wi-Fi Extender, you need to fist keep the device in a close proximity of your existing router. You can use a laptop to browse the URL http://dlinkap.local./ and follow the on-screen instructions to complete the setup of the Extender.
- How do I increase my Wi-Fi range?
To increase the Wi-Fib range of your current wireless router, you can install a range extender. Upon configuring the range extender, you can use multiple Wi-Fi-enabled devices in the network for an extended range.
- How do you use a Wi-Fi range extender?
Using a Wi-Fi range extender requires you to place the device in a location so that it can receive the existing Wi-Fi network. Next, you need to log into the extender using a wireless-enabled device, and enter the login credentials of your Wi-Fi network. Lastly, wait for the range extender to connect and extend the signal.
D-Link DAP-1520 Range Extender is an excellent device that helps you strengthen the wireless range of your network. Ensuring smooth functioning of the device requires you to perform a correct setup. Follow the setup steps of your D-Link DAP-1520 the exact way as mentioned here and ensure an all journey with your internet.
