Over time, the use of wireless routers has significantly increased. They offer you an excellent opportunity to ensure stable and high-speed internet. Besides, you can use them to manage your wired or wireless networking requirements. While the benefits of using a wireless router are many, it is critical to ensure the device’s proper setup, especially when you are a regular user of the internet. Here, we will discuss the router IP address 192.168.10.1, how you can use it to configure your router and its associated aspects.
An Introduction To http://192.168.10.1
The default login IP address “192.168.10.1” is reserved for wireless routers and modems. Browsing http://192.168.10.1/ or https://192.168.10.1/ allows you to access the admin interface of your router. Modems or wireless routers like TRENDnet, UPVEL, or D-Link use 192.168.10.1 as their default IP address.
However, this IP is not the only default IP for all the router models. There are many other IP addresses like 192.168.1.1, 192.168.0.1, and 192.168.2.1 associated with various other router models available in the market. For example, Belkin Router IP address uses 192.168.2.1 as its default IP. Similarly, 192.168.1.1 is associated with Netgear Router’s default IP.
Features of 192.168.10.1 Router IP Address
There are multiple features of the router IP “192.168.10.1”. Some of them are as follows:
- The default router IP 192.168.10.1 is a private IP address and you cannot use it on the public network.
- It is a unique and secured IP address that maintains the local traffic on the network.
- The “192.168.10.1” IP cannot be routed to the internet. Hence, you cannot use it on the internet.
- You can use the http://192.168.10.1/ IP for home or office network.
- The Internet Assigned Numbers Authority (IANA) reserves the “192.168.10.1” for private intranets.
How To Use http://192.168.10.1/ Router IP?
Accessing the router admin console and configuring your wireless router requires you to browse https://192.168.10.1 first. Next, you will be asked to enter the router login username and password. In case you are accessing the router management console for the first time, you can use the router login credentials written at the back or bottom of the router.
However, if you have ever changed these details, you need to enter the appropriate login username and password. Instances might happen that you have lost or forgotten the router login password. In such cases, you need to perform a factory reset of the router.
Tips To Change The “192.168.10.1” IP Address
While you can use http://192.168.10.1 to access the router admin console, you can also change the IP to a desired one. Here’s the series of steps that you can follow to change your router IP address 192.168.10.1 to another one:
- Open a web browser on your computer.
- Type https://192.168.10.1/ and press Enter to open the router admin console.
- Type in the router login username and password.
- Under the Setup menu, click on the Network Settings option.
- Under router settings, type in your desired IP address.
- Save the changes and log out of the router management console.
Issues and Fixes Of 192.168.10.1 IP Address
With the many features and benefits of browsing https://192.168.10.1, it comes along with issues while logging in to the router management console, especially when you have lost or forgotten the router login password.
To resolve such issues, you need to perform a factory reset of the router. All you need to do is press and hold the reset button on the router for about 10 seconds and release it when the router reboots automatically. Once the router reboots, log into the router management console using the default login credentials and set the desired password. Apart from this, to ensure the basic hygiene of your router, ensure the following:
- Always use a UPS while configuring your router by browsing http://192.168.10.1.
- In case you use a wired connection for the internet, ensure that you are using good quality Ethernet cables.
- Ensure that the router Power LED keeps on flashing when active.
In instances like the Netgear router not working issue, you can perform some initial troubleshooting steps as mentioned under:
- Ensure that the router power LED is flashing.
- Check if your computer is connected to the router properly, especially if you are using a wired connection.
- Switch off the router for about two minutes and turn it on to check if the issue has been resolved.
Frequently Asked Questions (FAQs) on Router IP 192.168.10.1
- Why should I use the router IP 192.168.10.1?
Using the https://192.168.10.1 allows you to access the router admin console. You can use it for configuring your wireless router.
- How to connect to 192.168.10.1 router IP?
Connecting to the default router IP 192.168.10.1 requires you to enter this IP address on the browser’s address bar and press Enter. Next, you need to enter the router login credentials to access the router management console.
- Why I’m getting an “ERR_CONNECTION_TIMED_OUT” Error while accessing 192.168.10.1?
Using a wrong IP address could lead to such errors. Check if you have connected your device to the wireless network.
- How can I change the password of my router using 192.168.10.1?
To change the router password using the IP 192.168.10.1, click on Settings > Change Password, and set the desired password.
- How to change the IP address 192.168.10.1 to another one?
Changing the router IP address to another one requires you to first log into the router management console using appropriate login credentials. Next, click on Additional Settings > LAN Settings, and set the desired IP address.
Browsing https://192.168.10.1/ gives you access to log into the wireless router and configure it. Follow the steps to use this IP the exact way as mentioned here and ensure a hassle-free router configuration.