With in-built 2TB storage capacity and 802.11n Dual-Band feature, the Netgear WNDR4720 Router supports high-speed internet of up to 450+450 Mbps. The Netgear WNDR4720 setup simplifies your digital home, secures your important data, and lets you experience uninterrupted video streaming and gaming.

Additionally, the Netgear WNDR4720 N900 CentriaWiFi Storage Router works as a Media Server that helps you in storing your media on the router. You can access your stored media using any WiFi-enabled device. Carefully read this web page to find complete information on the Netgear WNDR4720 setup and learn some effective troubleshooting methods to fix the commonly occurring WNDR4720 router issues.

Netgear WNDR4720 Manual

You will find the Netgear WNDR4720 manual in the Netgear WNDR4720 router package. The Netgear WNDR4720 manual has complete information about Netgear WNDR4720 router installation, setup, and guidelines for using the various features of the WNDR4720 Netgear Router. You can refer to the Netgear WNDR4720 manual if you face any issues during the setup or installation of the router.

Netgear N900 WNDR4720 Setup

How to do Netgear WNDR4720 Router Setup?

The Netgear N900 WNDR4720 setup is divided into two categories – Phase 1 and Phase 2.

Phase 1: Netgear WNDR4720 N900 Centria Router Configuration

Before the Netgear WNDR4720 setup, you need to physically connect your router.

  1. Disconnect any cables connected to your computer.
  2. Switch on the modem by plugging the power adapted to an electrical wall socket.
  3. Connect the router and the modem by plugging one end of an Ethernet cable to the modem and the other to the internet port of the router.
  4. Connect your computer and the Netgear WNDR4720 router by plugging one end of an Ethernet cable to the LAN port of the computer and the other to one of the LAN ports of the router.
  5. Switch on the router by plugging the router power adapter to an electrical wall socket. Ensure that the power lamp on the router is on.

Phase 2: Netgear WNDR4720 Router Login

  1. Perform a Netgear WNDR4720 login by connecting your router to a computer using the Ethernet cable.
  2. Open a web browser on the computer and visit www.routerlogin.com.
  3. Enter the default username and password of the router in the requested field.
Netgear WNDR4720 Firmware

Netgear WNDR4720 firmware update helps you in resolving various issues of your Netgear router. Additionally, upgrading the Netgear WNDR4720 firmware adds more features to the router. Let’s see how to perform the Netgear WNDR4720 firmware upgrade:

  1. Open a web browser on your computer and visit Netgear’s official site.
  2. Download the latest firmware version of Netgear WNDR4720.
  3. Using an Ethernet cable, connect the computer and the router.
  4. Type in www.routerlogin.net and hit Enter.
  5. Enter your router login credentials and press Enter.
  6. Under the Administrator tab, click on Advanced.
  7. Click on the “Firmware Update” option.
  8. Choose Upload and select the downloaded file.

Netgear Centria WNDR4720 Setup | Common Setup Issues

  • Cannot access the router management console using www.routerlogin.com
  • Unable to open the Netgear router login page
  • Netgear WNDR4720 login issues
  • Unable to perform the NetgearWNDR4720 reset
  • Netgear Router WNDR4720 error 404
  • Not connecting to the internet after Netgear N900 WNDR4720 setup
  • Conflicting IP addresses
  • VPN issues during the NetgearWNDR4720 N900
  • Netgear N900 WNDR4720 password recovery issues
  • WiFi error with WNDR4720 Netgear N900
  • Netgear WNDR4720 Router error 651
  • Lost or forgotten Netgear WNDR4720 default password
  • Can’t upgrade Netgear WNDR4720 firmware
  • Netgear WNDR4720 default password not working
  • Netgear WNDR4720 N900 VPN issues
  • NetgearWNDR4720 default login username not working

Netgear N900 WNDR4720 Setup | Troubleshooting WNDR4720

  • Ensure that all the cables such as the power cable and the Ethernet cable are properly connected. Maintain a visible distance between the router and the modem to avoid the WiFi signals from clashing.
  • If www.routerlogin.com is not working, check your web browser. If the issue persists, try browsing 192.168.1.1 to access the router management console.
  • Ensure that you use the updated web browser.
  • If any devices are not in use; however, they are connected to the WiFi network, turn them off.
  • Disable the firewall or any proxy servers in use to resolve VPN issues during the Netgear N900 WNDR4720 setup.
  • Check the DNS servers and hard refresh the web page to resolve the Netgear WNDR4720 error 404.
  • If you have encountered error 651, reinstall the network adapter driver and update the Netgear WNDR4720 firmware.
  • Delete browser cache and cookies, and disable any proxy servers in use.
  • Restart the whole wireless network as well as the modem.
  • If you are unable to log in using the Netgear WNDR4720 default login password and the username, refer to the Netgear WNDR4720 manual for these details.
  • If you have lost or forgotten the Netgear WNDR4720 default password, hard reset your router.
Frequently Asked Questions (FAQs) on Netgear WNDR4720 N900 Router

How to set up the Netgear N900 WNDR4720 Router?

To set up the Netgear WNDR4720 Router, follow the steps mentioned below:

  1. Disconnect any cables connected to your computer.
  2. Switch on the modem by plugging the power adapted to an electrical wall socket.
  3. Connect the router and the modem by plugging one end of an Ethernet cable to the modem and the other to the internet port of the router.
  4. Connect your computer and the Netgear WNDR4720 router by plugging one end of an Ethernet cable to the LAN port of the computer and the other to one of the LAN ports of the router.
  5. Switch on the router by plugging the router power adapter to an electrical wall socket. Ensure that the power lamp on the router is on.
  6. Perform a Netgear WNDR4720 login by connecting your router to a computer using the Ethernet cable.
  7. Open a web browser on the computer and visit www.routerlogin.com.
  8. Enter the default username and password of the router in the requested field.

How many computers or WiFi-enabled devices can be connected to the WNDR4720 Netgear N900 Router?

The Netgear WNDR4720 Wireless dual-band router can handle a total of 64 devices. For detailed information, you may refer to the Netgear WNDR4720 manual.

How to recover the lost or forgotten WNDR4720 router login password?

If you have lost or forgotten the Netgear WNDR4720 router login password, you need to do a hard reset of the router. Here’s how you can do it:

  1. While keeping the router powered on, insert a pointed-object such as a paperclip into the reset port of the router for about 10 seconds.
  2. Once the power lamp on the router is lit, remove the paper clip.
  3. Wait until the router reboots automatically.
  4. Open a web browser on your computer and type 192.168.1.1.
  5. Hit enter and fill the default router login username and password. You will find the details at the back or bottom of the router.
  6. From the Advanced tab, set a desired router login password.

How can I do a factory reset of my Netgear WNDR4720 Router?

Performing a factory reset of the Netgear WNDR4720 Router requires you to follow the below-mentioned steps:

  1. Ensure that the router is active and that the power light is on.
  2. Locate the router reset port at the back of the router.
  3. Use a paperclip to insert and hold it for about 10 seconds.
  4. Wait until the router reboots automatically.
  5. Once your router resets, visit 192.168.1.1 to access the router management console.
  6. Enter the default router login credentials as mentioned at the back of the router.

How do I upgrade my Netgear WNDR4720 router firmware?

Follow the below-mentioned steps to upgrade the Netgear WNDR4720 router firmware:

  1. Open a web browser on your computer and visit Netgear’s official site.
  2. Download the latest firmware version of Netgear WNDR4720.
  3. Using an Ethernet cable, connect the computer and the router.
  4. Type in www.routerlogin.net and hit Enter.
  5. Enter your router login credentials and press Enter.
  6. Under the Administrator tab, click on Advanced.
  7. Click on the “Firmware Update” option.
  8. Choose Upload and select the downloaded file.