Find the complete information for the setup of Netgear Wireless Router WNR2000 and its manual on this web page. On completing the setup of Netgear N300 WiFi router WNR2000, you can connect all of your computers and smart devices wirelessly and experience high-speed internet. Use the Netgear N300 WNR2000 WiFi speed for downloading, streaming music and video and online gaming.

Netgear Wireless Router WNR2000

802.11n Gigabit

Connect all your wireless devices with the Netgear N300 WiFi router WNR2000. You can easily configure and set up the router and can monitor it using mobile devices. Delivering download speed up to 300 Mbps, it’s advanced QoS promises a high-speed gaming experience. Use the router’s Ethernet/LAN Ports to get a reliable wired connection for your home or office space. Besides, the WNR2000 Netgear is secured with a firewall and WPA/WPA2 encryption for protecting your data.

Netgear Router WNR2000 Manual Guide for Setup

The package of the N300 router includes the Netgear WNR2000 manual. It contains the complete installation, Netgear router WNR2000 setup procedure, Netgear N300 wireless router WNR2000 specifications, and guidelines for using the various features of the router. It is important that you go through the Netgear N300 WNR2000 manual before executing the setup.

Netgear Router WNR2000 Setup and Login

How to do Netgear Router WNR2000 Setup?

You can configure the Netgear N300 WiFi router WNR2000 by following some simple procedures. For easy understanding, the Netgear Router WNR2000 setup is divided into two phases. Here’s a look:

Phase 1: Configuring the Netgear Wireless N300 Router WNR2000

Before you start with the Netgear Router WNR2000 setup, you need to physically connect your router by following these steps:

  • Remove all the cables connected to your PC.
  • Turn on the modem.
  • Use the Ethernet cable to plug one of its ends to the modem and the other end to the internet port of the router.
  • Plug one end of an Ethernet cable to the LAN port of your PC and the other end to any of the LAN ports of the router.
  • Switch on the router and ensure that the power lamp is on.

Phase 2: Netgear WNR2000 Login

  • Once you connect your PC to the Netgear Wireless N300 Router WNR2000, open a web browser on your computer.
  • On the browser’s address bar, type http://www.routerlogin.com or 192.168.1.1, and hit Enter.
  • Enter the default username and Netgear WNR2000 default password.

Netgear N300 | Common Netgear Router WNR2000 Setup Issues

  • Netgear N300 WiFi Router WNR2000 login not working
  • Netgear N300 Wireless Router WNR2000 can’t access 192.168.1.1
  • Unable to find Netgear WNR2000 default password
  • Can’t update Netgear WNR2000 firmware
  • Cannot do Netgear WNR2000 reset
  • Netgear WNR2000 login issues
  • Unable to do Netgear WNR2000 factory reset
  • Lost or forgotten Netgear WNR2000 password
  • Cannot do Netgear router WNR2000 setup
  • WiFi errors such as the router cannot connect to the internet.
  • Netgear N300 WNR2000 error 404
  • Cannot find Netgear WNR2000 specs
  • Unable to do Netgear WNR2000 troubleshoot
  • Netgear Wireless N300 router WNR2000 orange light issue
  • Netgear N300 WNR2000 manual error 651
  • Netgear N300 Wireless Router WNR2000 IP address conflict
  • VPN issues during the Netgear router WNR2000 setup
  • Slow internet or WiFi after Netgear Router WNR2000 setup

Netgear WNR2000 Troubleshooting

  1. Ensure all the cables such as power cables and Ethernet cables are connected properly.
  2. Maintain a visible distance between the Netgear N300 Wireless Router and the modem.
  3. To recover the Netgear WNR2000 password, hard reset the router, log in to the router management console using the default login credentials, and change the password.
  4. Switch off or disconnect the devices from WiFi in case they are not in use.
  5. Ensure that the WNR2000 Netgear is receiving an adequate amount of power supply.
  6. Ensure that the web browser is not outdated.
  7. To perform a Netgear WNR2000 reset, use a sharp-pointed object like a pen and insert the needle to reset port for about 10 seconds until the router reboots automatically.
  8. Disable any proxy servers on your system and delete cache and cookies.
  9. Restart the entire network along with the computer.
  10. Refer to the Netgear N300 WNR2000 manual if the Netgear WNR2000 default password is not working.
  11. Do a Netgear WNR2000 factory reset in the case of lost router login credentials.
  12. To resolve the Netgear N300 Wireless Router WNR2000 Netgear error 651, reinstall the network adapter driver and update the Netgear WNR2000 firmware.
Update Netgear WNR2000 Firmware Update

Resolving various Netgear Wireless Router WNR2000 issues and adding new functionalities requires you to update the firmware. Here’s how you can do it:

  1. Visit Netgear’s official website to download the latest firmware of N300.
  2. Use the Ethernet cable to connect the router and the computer.
  3. Open a web browser on your computer and browse routerlogin.net.
  4. Under the Administrator tab, click on Advanced.
  5. Click on the “Firmware Update” option to update the Netgear WNR2000 firmware.
  6. Select Upload and choose the downloaded file to complete the process.
FAQs on Netgear WNR2000 Wireless Router

Why is my Netgear WNR2000 router isn’t responding and the power LED is flashing slowly?

The slow flashing of the power indicator means that your router has corrupt firmware. You can run the router resource CD, select “Supporting Software”, and run the Netgear Firmware Utility to resolve the issue.

How to set up Netgear N300 WNR200 Router?

Follow the below-mentioned procedure to set up your WNR2000 Netgear router:

  1. Remove all the cables connected to your PC.
  2. Turn on the modem.
  3. Use the Ethernet cable to plug one of its ends to the modem and the other end to the internet port of the router.
  4. Plug one end of an Ethernet cable to the LAN port of your PC and the other end to any of the LAN ports of the router.
  5. Switch on the router and ensure that the power lamp is on.
  6. Once you connect your PC to the Netgear Wireless N300 Router WNR2000, open a web browser on your computer.
  7. On the browser’s address bar, type http://www.routerlogin.com or 192.168.1.1, and hit Enter.
  8. Enter the default username and Netgear WNR2000 default password.

Why can’t I access the WNR2000 Netgear router management console using routerlogin.net?

If you are unable to access the router management console using routerlogin.net, try using the router IP address – 192.168.1.1.

Why do I need the latest firmware on my Netgear router?

The latest firmware helps you enhance the performance and functionality of your router. The latest and updated firmware resolves issues as well as adds advanced and new features to the router.

Where to find my Netgear WNR2000 specs?

You can refer to the Netgear WNR2000 manual for detailed information about your router.

How to do Netgear WNR2000 reset?

To perform a Netgear WNR2000 factory reset, insert a pointed object, such as a paperclip into the reset port of the router and hold for about 10 seconds. The router will reboot automatically.

I forgot my Netgear WNR2000 password. What to do?

If you have lost or forgotten the Netgear WNR2000 password, you need to do a hard reset of your router. Insert a pointed object, such as a paperclip into the reset port of the router and hold for about 10 seconds. Next, log in to the router using the default login credentials and change the password accordingly.