Apple router is used to connect Airport-enabled PCs to the Internet or each other via wireless network or wired LAN and other devices. Using Apple routers, you will probably find the information shared here highly useful, especially if you are looking forward to getting the correct information for the Apple router. Here, we’ll discuss the processes of reset Apple Router for the Airport Express and Apple Airport Extreme. You can also refer to the information listed here for the Apple router setup for Airport Express Setup and Airport Extreme Setup. So, let’s get started.

Apple Airport Express Setup:

The Apple Airport Express setup enables you to connect multiple devices, such as WiFi-enabled desktop, laptop, smartphones, etc. and wirelessly meet your online requirements. Once you are done with the Apple Airport Express setup, you can also use the Ethernet ports of the router to connect wired devices using an Ethernet cable.

  • To start with the Airport Extreme Setup, plugin the Airport Base Station first.
  • Install the Airport Utility Software from the CD provided with the device or from Apple’s official website.
  • Launch the Airport Utility program. The Airport Express Base Station will be visible on the left. Click on it to Select it.
  • Click on Continue.
  • Enter the Airport Express Name and a password for the same.
  • Click on Continue.
  • Select the Airport Express connection Type-Choose whether you want to connect the Airport Express to the existing Wi-Fi network or connect via an Ethernet.
  • If you have got a wireless network, you can proceed with the following steps during the Apple Airport Express setup.
  • So, select the option – ”I want Airport Express to wirelessly join my Current Network’.
  • Click on the Continue Tab.
  • Select your network from the list of the available wireless networks.
  • Click on Continue.
  • After the settings are saved, then the AirPort express will restart. The Airport Express will be visible in the Airport Utility window with the new name you gave it earlier, and the process of apple airport express setup is complete.

You have completed the process of Apple airport express setup, and now the Apple Airport is ready to be used after the airport express setup.

Apple Airport Express allows users to share devices such as Printers wirelessly with other computers. Process of Reset airport base Station enables users to gain access when you are unable to access the base station or have lost the password.

Follow the Airport Express Setup process the exact way as mentioned above, for smooth functioning of the router. If you want to reset airport Express, then follow the steps as mentioned below:

  • Find the Reset button on the base station. You can find it next to the ports.
  • Press the button with a paperclip or a pen when instructed.
  • You can reset the airport express by performing a Soft Reset, Hard Reset, or factory reset based on the model.
  • Let us get started and learn to execute the different methods of Reset.

Soft Reset– This Reset of Apple Airport Express will reset the base station and will disable the security for five minutes. The Access Control and the RADIUS will be disabled, and it will allow you to join the network and make the necessary changes. You have to do so within five minutes, and the base station will revert to its previous settings. If you have forgotten the password, you can proceed with the Soft Reset and re-access your Base Station to reset airport Express.

Hard Reset- It will reset the base station to an unconfigured state, but it will retain the last settings and profiles. It will help you restore the device from the previous settings, and you can proceed to gain access to the base station if it is not responding. If you have tried other solutions to troubleshoot an unresponsive base station, then the Hard reset process will work. Once done, you can also perform the Apple Router setup and set your wireless networking preferences.

Factory Reset: This Reset is similar to the Hard Reset, but it will not retain the last configurations and settings. If you don’t intend to use the base station anymore, you can proceed with the Factory reset to reset airport Express.

Requisites for Factory Reset and Hard Reset

  • The primary requisite to reset airport Express is that the base station should be set to request an IP address by DHCP, and the password should be set as “public.”
  • The base station name is entered as “base station.” The name is followed by the last six digits of the base station’s MAC address.
  • The base station network name is set as “Apple Network.” It should be followed by the last six digits of the base station’s MAC address.

How to Reset Airport Extreme

It might be troublesome to perform an airport extreme reset. The action requires experts’ assurance for resolving the various errors of the device. Follow the below-mentioned steps to reset Airport Extreme:

  • Unplug the power cable from the rear side of the device to start the Apple Airport Extreme reset.
  • Find the reset button, which is located right to the power port.
  • Press a sharp-pointed object such as a paperclip into the reset button at the back of the device.
  • Keep holding the reset button and connect the power plug into the socket located at the device’s end. Remember that you should not remove the paper clip or the object you have inserted into the reset button during the process.
  • Keep the Reset button pressed for about 6 seconds, and you’ll see an amber color light flashing at the front of the Airport Extreme.
  • Now, wait for a minute or so for the device to restart.
  • Soon you can launch Airport Utility and can reconfigure your Airport Extreme device.
  • It completes the process of Reset Airport Extreme.
Airport extreme setup

Using the Airport Extreme requires you to have a WiFi-enabled computer, compliant with the IEEE 802.11a, 802.11b, 802.11g, or 802.11n specification. If you have a Mac, you must fulfill the following requirements:

  • A Mac computer with in-built AirPort or AirPort Extreme card
  • A Mac computer connected to an Airport Extreme Base Station with an Ethernet cable
  • Mac OS X v10.2.7 or later
  • AirPort IUtility 5.5.3 or later

Follow the steps below for apple airport extreme setup. 

  • Connect the Ethernet cable in the ethernet port located on the extreme left of the Apple airport extreme base station.
  • It is the WAN port that you can quickly identify as it is marked with a circular image.
  • Plug the adaptor into the port and plug it into the socket and switch it on.
  • After the device has been connected into the network and turned on, the status light on the device’s front will flash numerous times. When it comes to a standstill with a solid green light, it means the device has started and connected to the network.
  • Tip- if the status light does not turn solid green, it would be best to refer to the manual guide and get clarity on the status light.
  • The Wireless card on your PC should be enabled and powered on, and then you need to connect to the device.
  • Now you have to install the Airport Software from the CD provided to proceed with the process of Apple airport extreme setup.
  • After the installation process is complete, you have to launch the Airport Utility Application. You can find it under the Utility folder in the Application folder. For this process, you need to go to Start and Click on All Programs and click on the Airport on a Computer using Windows.
  • Click on your Base Station and then click on Continue to proceed with the Airport Extreme Setup.
  • Enter the Names for Wireless Network and Base Station and then Click on Continue.
  • It will help you identify the Airport Base Station from other Airport Base Stations connected to your network.
  • Enter a password in the Airport Extreme Password and Verify Password box to continue with the Apple Airport Extreme setup.

Tip- You can select the Remember this Password in my Keychain checkbox to save the password for the device in the encrypted Keychain Access Database.

  • Click on Continue.
  • Click on ‘I want to create a new Wireless Network’ and continue with the setup of Apple airport extreme base station.
  • Enter a name in the Wireless Network Name field. This name will be visible when a user wasn’t to connect to this network.
  • It would help if you secured the system with a password to create an authentication required to connect to your network. For doing so, click on WPA2 Personal and enter a password in the Wireless password field and Verify Password Field.
  • However, if you do not want to secure your network with a password, you need to click on No Security. Not if you’re using a Home Network, it is advisable to create a password.
  • Click On Continue.

The Airport Utility will automatically detect the Airport Express Base Station requirement to be connected in a bridge mode, or it needs to share an IP address using the DHCP and NAT.

  • If the device is connected to the router, you should select the Bridge Mode, or you need to choose the option – Share a single IP address using DHCP and NAT.
  • Click on Continue.
  • Click on -Using DHCP from the configure IPv4 menu.
  • Click on Continue.
  • Click on Update.
  • Click on Continue.
  • Wait for the device to start, and the setup process is completed.
  • Click on Quit to exit from the Airport Extreme Setup process.
  • Now the Airport Extreme wireless Network will be available, and you have completed Airport extreme setup.
  • Click on Quit, and you have completed apple airport extreme base station set up.
  • Now your Apple Airport Extreme is connected to the Internet.

The above shared information will act as a complete guide for the Apple router setup and to reset Apple router.